Electric King, E60, Hazardous Location
Quick Overview
The Graco King E-series electric airless sprayer is for protective coatings and certain models have been approved for extreme and hazardous locations. The King E-series is much more reliable, convenient due to being run on electric power source, which removes job site reliance on compressed air. Since it runs on electric it reduces pulsation and stops motor icing, allowing for jobs that run smoother every time.
The electric solution for spraying protective coatings
King E60 Product Features
Electric
when set up correctly, electric power is much safer, more reliable and convenient for you and your customers. You no longer need to rely on an air compressor.
No icing
By removing an air motor, icing problems are greatly reduced. Icing is more of a risk under conditions of a high level of humidity, which results in slowing of the motor and loss of pressure which can result in downtime and drastically slows production rates. The e-Xtreme sprayer is an electric solution that will keep you spraying at the pump’s maximum potential.
Reduced noise levels
No matter what the job, noise exposure can greatly affect your working conditions. The electric motor makes the machine much quiet, which improves working conditions. When compared to an air motor, the King E-series is up to five times quieter.
Plug-in & Spray
The King E-series can run on multiple power options (120V or 240V). Can handle a range of Graco spray tip sizes. Low pulsation gives a consistent spray pattern, with reduced overspray. The smooth pattern is noticeable at the gun. Capable of spraying a range of high-solid coatings.
ATEX safety approved
The Graco King E-series is approved for extreme and hazardous locations. ATEX, IECEx, and Class 1, Div. 1 approvals* mean this KING can be used in chemical plants, paint shops, refineries, off-shore, or any location where risk of fire is of concern.
Energy savings
Lower cost of ownership and improved efficiency, the King E-series is the most cost-effective solution when compared to pneumatic airless sprayers. The King E-series saves up to 80% of energy costs when compared to an air-operated sprayer*. By removing the need for an expensive, heavy air compressor, you can stay productive by using the most reliable power source available – electricity! *Study completed for a pump pressure of 241 bar (3500 psi) for 20 hours/week; spraying 1226 L (324 gal) of 73% volume solids epoxy with XHD519 tip.
Graco Warranty
Graco provides a three-year limited warranty - every piece of equipment Graco manufacture comes with a warranty. The King E-series offer a three-year warranty on the gear train, chassis, and electric motor. Electronics cover and all other King E-series driver parts are covered by the standard one-year warranty. See the product manual for specifics on all warranty information.